Abit KN8 ULTRA User Manual page 18

3. After placing the CPU into position, push
the socket lever down into its locked
position to secure the CPU. The lever
clicks when it's locked into position.
4. The heatsink for CPU may have thermal
interface material
bottom. If not, applying a few squeeze
of thermal paste to the CPU die will help
to increase the contact.
5. Place the heatsink and fan assembly
onto the retention frame. Match the
heatsink clip
mounting-lug. Hook the spring clip to
the mounting-lug.
Put the CPU Fan down on the retention
module and snap the four retention legs
of the cooling fan into place.
6. On the other side, push the retention
clip straight down to lock into the plastic
lug on the retention frame.
2-10
attached to its
with the socket
KN8 Ultra-SOTES, KN8 Ultra, KN8