Abit KV-82 User Manual page 33

BIOS Setup
On-Chip IDE-1 Controller:
This item selects whether to enable or disable the IDE-1 controller.
On-Chip IDE-2 Controller:
This item selects whether to enable or disable the IDE-2 controller.
IDE Prefetch Mode:
Two options are available: Disabled or Enabled. The default setting is Enabled. The onboard IDE drive
interfaces supports IDE prefetching for faster drive accesses. If you install a primary and/or secondary
add-in IDE interface, set this field to Disabled if the interface does not support prefetching.
OnChip PCI Device:
Click <Enter> key to enter its submenu:
OnChip Audio Controller:
This option enables or disables the audio controller.
Onboard LAN Controller:
This option enables or disables the LAN controller.
LAN Boot ROM:
This item enables or disables the Boot ROM on LAN controller.
Onboard 1394 Controller:
This option enables or disables the IEEE 1394 controller.
OnChip USB Controller:
This option enables or disables the USB controller.
USB 2.0 Controller:
This option enables or disables the USB 2.0 controller.
3-11
User's Manual