Configure The Settings Relating To Jpeg Images [Jpeg/H.264] - Panasonic BL-VT164 Series Operating Instructions Manual

9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings
9.2 Configure the settings relating to JPEG images
[JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image/Audio" page. (®page 34, page 35)
JPEG
Configure the settings such as "Refresh interval (JPEG)*", "Image capture size" and "Image quality" on this
section. Refer to page 49 for further information about the settings relating to H.264 images.
"Live" page (Initial display)
Configure the settings relating to the JPEG images displayed on the "Live" page.
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps*/ 10fps*/ 12fps*/ 15fps*/ 30fps*
•
Default: 30fps*
Note
•
When "H.264 transmission" is operating, the refresh interval may be longer than the set value when
any value with an asterisk (*) on the right is selected.
•
Depending on factors such as the network environment, the resolution, the image quality, or the number
of computers concurrently accessing the camera, the transmission interval may be longer than the set
value.
•
If images are not delivered in the specified transmission interval, you can make the images be delivered
closer to the specified time by lowering the resolution or image quality.
[Image capture size]
Select the image capture size to display the JPEG image on the "Live" page for the first time.
When "4:3" is selected for "Aspect ratio"
VT164W VT164W VT164 VT164
QVGA/ VGA/ 800x600
:
VP101 VP101
QVGA/ VGA
When "16:9" is selected for "Aspect ratio"
VT164W VT164W VT164 VT164
320x180/ 640x360/ 1280x720
:
VP104W VP104W VP104 VP104
:
VP104W VP104W VP104 VP104
relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101)
Operating Instructions 47