Table of Contents
Advertisement
Setup menu
Menu item
TC REGEN
REGEN MODE
AUDIO MUTE
SD SUPER
COMP SETUP
DOWN CONV
ALARM MSG
"Default" denotes the factory settings.
14 (E)
Parameter
CONV (Default)
For selecting the time code which is to be output from the display
ORG
panel or RS-422 connector.
CONV: Time code resulting from the conversion of the head or syn-
ORG: Time code during recording.
<Note>
The value which was last selected will be used as the setting when
the unit is started up.
NORMAL (Default)
For selecting the time code conversion method.
24PSync
NORMAL: Conversion with no synchronization point (head =
24PSync: With the 25 p output, conversion with the designated syn-
<Note>
The value which was last selected will be used as the setting when
the unit is started up.
ON
For selecting the setting at which the sound is to be muted in the E-E
OFF (Default)
mode.
ON: The sound is muted.
OFF: The sound is not muted.
OFF
For selecting whether the TC and/or UB display is to be superim-
TC (Default)
posed onto signals to the SD OUT connector.
TC/UB
OFF:
TC:
TC/UB: The time code and user's bit are displayed.
<Note>
The value which was last selected will be used as the setting when
the unit is started up.
OFF
For selecting whether to set the setup level addition function for the
ON (Default)
SD OUT connector.
OFF: The setup is not added.
ON: The setup is added.
<Note>
The value which was last selected will be used as the setting when
the unit is started up.
525i (Default)
For setting the SD OUT connector. Depending on the HD output, it
625i
may not be possible to select a setting for this item.
<Note>
The value which was last selected will be used as the setting when
the unit is started up.
OFF
For setting whether to display the alarm screen (see page 19) when
ON (Default)
an error has occurred.
OFF: The alarm screen is not displayed.
ON: The alarm screen is displayed.
<Note>
The value which was last selected will be used as the setting when
the unit is started up.
Description
chronization point as 00:00:00:00.
00:00:00:00).
chronization point serving as the basic point.
Conditions under which 24PSync TC conversion operates
normally:
Output format: 1080/25P, 720/25P over 59.94P/60P
Time code: CONV
No display.
The time code is displayed.
Advertisement
Table of Contents
