Plextor PX-610U Installation And User Manual page 9

adapter or multiple USB ports. Through the addition of
internal battery power, the PX-610U requires only a single
USB port for power and data transfer. For older USB
connections, the internal battery, which charges when the
drive is idle, provides additional power for DVD writing and
other activities.
Note: Before initial use, please charge your PX-610U's internal battery via the USB
cable provided with your drive (4-6 hours). USE ONLY THE USB CABLE
PROVIDED WITH THIS DRIVE. Failure to do so may lead to failure or
insufficient drive performance.
Note: There are two kinds of USB Ports: High-power port, which can supply 5V
maximum 500mA power; Low-power port, which can supply 5V Maximum 100mA
power. Most desktop computer USB ports are high-power USB ports. On a laptop
computer, normally at least one USB port is high-power port, the other USB ports
may be high-power ports or low-power ports, please check your laptop manual.
Flash memory: Allows upgrading the PX-610U to the latest
•
firmware revision (available from the Plextor web site and via
PlexUTILITIES) without opening the computer or physically
accessing the drive.
Black tray: Reduces the effect of optical distortion by absorbing
•
reflections from the laser beam, enhancing read quality.
Plug and Play: Supports Windows Plug and Play.
•
DVD Features
Lossless linking for DVD+R/RW and DVD+R DL: Allows
•
DVD+RW and DVD+R DL discs to be edited and still play on
DVD-ROM players.
Zero Link for DVD-R/RW, DVD-R DL: Has 0 byte gap between
•
sessions so the discs are compatible with all players. This allows
DVD-RW and DVD-R DL discs to be edited and still play on
DVD-ROM players.
Double layer and dual layer DVD discs: Reads and writes DVD+R
•
DL (double layer) and DVD-R DL (dual layer) discs, so you can
burn up to 4 hours of high quality MPEG-2/DVD video on a single
8.5-gigabyte DVD disc.
Section 1. Getting Started
PX-610U Installation and Users Manual
3