Inserting Combination Shelf, Baking Tray And Roasting Tray - AEG Electrolux COMPETENCE E9971-4 Operating Instructions Manual

Inserting combination shelf, baking tray and roasting tray

3
Anti-tip device
All insertable components have a small curved indentation on their left
and right edges. This indentation serves as an anti-tip device and must
always point towards the back of the oven.
Inserting combination shelf:
Insert combination shelf so that the
two guide bars point downwards.
Insert the combination shelf onto
the oven shelf runners so that the
two holes engage onto the retaining
pins on the telescopic runners.
Inserting baking tray, roasting
tray:
Insert trays so that the anti-tip de-
vice is pointing towards the back of
the oven. Insert the trays onto the
telescopic runners so that the two
holes engage onto the front retain-
ing pins on the telescopic runners.
Inserting combination shelf and
roasting tray:
When using combination shelf and
roasting tray together, insert the
shelf's anti-tip device exactly into
the indentations in the tray.
3
To make it easier to insert the in-
sertable component when runners
are extended to different extents,
lay the insertable component onto
the runners, push it in as far as the stop and then lower it onto the re-
taining pins at the front.
27