Abit AN8 32X User Manual page 33

BIOS Setup
Shutdown Enable:
Use <Space> key to enable system shutdown function. If the voltage of corresponding element is
higher/lower than the high/low limit, the system would automatically shutdown.
Beep Enable:
Use <Space> key to enable warning beeps function. If the voltage of corresponding element is
higher/lower than the high/low limit, warning beeps will sound.
High/Low Limit:
These items set the high and low voltage limit.
NOTE: The value of high limit must be set above the one of low limit.
Fan Speed Monitoring:
Click <Enter> key to enter its submenu:
OC Guru
(*)CPU FAN Speed
( )NB FAN Speed
( )SYS FAN Speed
( )AUX1 FAN Speed
( )AUX2 FAN Speed
↑↓ → ←:Move Enter:Select +/-/PU/PD:Value
CPU/NB/SYS/AUX1/AUX2 FAN Speed:
These items display the speed of the fans connected to CPU, NB, SYS, AUX1 and AUX2 FAN headers.
Shutdown Enable:
Use <Space> key to enable system shutdown function. Once the system has detected that the fan speed is
lower than the low limit value, system will shutdown automatically.
Beep Enable:
Use <Space> key to enable warning beeps function. If the fan speed is lower than the low limit value,
warning beeps will sound.
Low Limit:
This item sets the low limit of fan speed.
NOTE: Only the fans with 3-pin plugs provide the speed monitoring function.
µGuru Utility V1.00
ABIT EQ
Fan Speed Monitoring
Reading
2880 RPM
4980 RPM
N/A
N/A
N/A
Shutdown Beep
Enable Enable
(*) (*)
( ) ( )
( ) ( )
( ) ( )
( ) ( )
F10:Save ESC:Exit
3-7
Low Limit
300 RPM
300 RPM
300 RPM
300 RPM
300 RPM
User's Manual