Abit AN8 32X User Manual page 15

Hardware Setup
3. Locate the SLI Bridge Connector in the
package.
4. Insert the SLI Bridge Connector into the
SLI goldfingers on each graphics card.
5. The SLI bracket included in the package is
used for supporting the SLI bridge connector
and the two SLI graphics cards.
6. Insert the SLI bracket into the bracket slot
between the graphics cards. Secure the SLI
bracket and the graphics cards to the chassis
with screws.
NOTE: The OTES SLIpstream that packed in
the package is optional. Please refer to the
Quick Installation
SLIpstream if you wish to install it.
Guide of the OTES
User's Manual
2-7