Abit NF7 User Manual page 56

3-14
LAN Controller:
This option enables or disables the LAN controller.
LAN Boot ROM:
This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the
local area network directly.
IEEE1394 Controller (For NF7-S Only):
This option enables or disables the IEEE 1394 controller.
Back to Integrated Peripherals Setup Menu:
Onboard PCI Device (For NF7-S Only):
Click <Enter> key to enter its submenu:
Serial ATA Controller:
This option enables or disables the onboard Silicon Image SIL3112A SATA controller.
Back to Integrated Peripherals Setup Menu:
Init Display First:
This item selects to initialize AGP or PCI Slot first when the system boots.
[PCI Slot]: When the system boots, it will first initialize PCI.
[AGP]: When the system boots, it will first initialize AGP.
EXT-P2P's Discard Time:
This item allows you to set EXT-P2P's discard time.
Onboard FDD Controller:
Two options are available: Enabled and Disabled. The default setting is Enabled. You can enable or
disable the onboard FDD controller.
NF7/NF7-M/NF7-S
Chapter 3