1745
Users Manual
Maximum Number of Intervals for Logging Funtion P
The maximum recording period can be calculated by multiplying the interval
time defined in PQ Log with the maximum number of intervals in the
following table.
Version
Averaged periods
General Information
Intrinsic uncertainty
Quality system
Recalibration interval
Reference conditions
44
P, V+I
> 24,000
Valid for reference conditions, and guaranteed for
two years.
Developed, designed, and manufactured according to
DIN ISO 9001.
Fluke recommends a recalibration interval of no
more than two years, depending on use.
23 C ±2 K, 230 V ±10 %
50 Hz ± 0.1 Hz / 60 Hz ± 0.1 Hz
Phase sequence: L1 or A, L2 or B, L3 or C
Interval length: 10 minutes, 3-phase Wye
configuration.
Power supply: 88 to 265 V AC
A, V+I
> 10,000