Panel Dimensions - GE ZICS360 LH Installation Instructions Manual

1/4" FRAMED PANEL DIMENSIONS
If you choose to install framed panels, they must be
cut to the dimensions shown. The panels will slide
into the frame on the door, drawer and grille.
If the custom panel is less than 1/4" thick and if it
fits loosely in the door frame, it can be backed up
with a piece of filler material or foam tape to
improve the fit.
A
Grille Panel
Fresh Food
Panel
Freezer Drawer
Panel
3/4" OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may be
installed on trimmed models. The overlay panel must
be secured to a 1/4" thick backer panel which slides
into the trim. A spacer panel 0.10" thick must be
placed between the overlay and backer panel.
Assemble the panels with glue and screws.
• Center the spacer panel on the backer panel, left to
right and top to bottom. Secure the panels with glue.
• Center the spacer and backer panel on the overlay
panel and secure with glue and screws. Screws must
be countersunk into the backer panel.
Design Guide
Framed Panel Dimensions
B
1/4" Framed Panel
C
Overlay Panel Dimensions
1/4" Backer Panel
D 0.10" Spacer Panel
3/4" Overlay Panel
IMPORTANT NOTE: Maximum total panel
weight:
• Fresh food door panel – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Grille Panel – 11 lbs.
A (Width) B (Grille Height)
33-7/8" 8-7/8"
A (Width) B (Grille Height)
33-7/8" 8-7/8"
32-1/2" 7-5/8"
34-1/8" 9"
Door/Drawer
1/4"
Backer
Panel
NOTE: Left-to-right offset is not always equal to
top-to-bottom offset.
7
5/16"
Trim
Door
Reveal
1/4"
Panel
C (FF Height) D (FZ Height)
46-1/16" 21-7/8"
C (FF Height) D (FZ Height)
46-1/16" 21-7/8"
44-11/16" 20-1/2"
46-5/16" 22"
Overlay Panel
Overlay
Panel
Spacer Panel
Backer Panel
IMPORTANT NOTE: Maximum
total weight for the assembled
.10 Inch panels:
Spacer
• Fresh food door panel – 58 lbs.
• Freezer drawer panel – 28 lbs.
• Grille Panel – 11 lbs.