Note
•
When the unit remains idle for 15 minutes, it switches
from standby mode automatically.
Set clock
1
In standby mode, press and hold CLOCK
on the remote control for more than two
seconds.
» [24H] or [12H] hour format is
displayed.
2
Press
/
to select [24H] or [12H] hour
format.
3
press CLOCK to confirm.
» The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set hour and minute.
Note
•
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•
You can view clock information in power-on mode by
pressing CLOCK.
4 Play
Basic play operations
You can control play through following
operations.
Key
Function
/
Press and hold to fast-forward/fast-
reverse the track during playback,
then release to resume play.
To pause/resume play during
playback.
DISPLAY
Select different play information.
REPEAT
To select a repeat play mode:
[REP] (repeat): play current track
repeatedly.
[REP ALL] (repeat all): play all
tracks repeatedly.
Press again to return to normal
play.
SHUFFLE
To play tracks randomly.
Press again to return to normal
play.
Play discs
1
Press CD on the remote control to select
the disc source.
2
Press on the top of the main unit.
» The disc door opens.
3
Place a disc face up onto the tray and
press again.
» Play starts automatically.
EN
9