Use Your Headset; Connect The Headset To A Bluetooth Device; Automatic Power Saving; Manage Your Calls And Music - Philips SHB9150 User Manual

4 Use your
headset
Connect the headset to a
Bluetooth device
1
Turn on your mobile phone/Bluetooth
device.
2
Press and hold
» The blue LED flashes.
» The headset is reconnected to
the last connected mobile phone/
Bluetooth device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Tip
•
If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headset, you have to reconnect the headset and mobile
phone/Bluetooth device manually.
Note
•
If the headset fails to connect to any Bluetooth device
within range in 5 minutes, it will switch off automatically
to save the battery life.

Automatic power saving

If the headset fails to connect any
Bluetoothdevice within range in 5 minutes, it
powers down automatically to save the battery
life.
EN
6
to turn the headset on.

Manage your calls and music

Call/Music button
Task Operation
Turn the Press and
headset on. hold for 1
second.
Turn the Press and
headset off. hold for 4
seconds.
Play or Press once.
pause
music.
Pick up/ Press once.
hang up a
call.
Reject an Press and
incoming hold for 1
call. second.
Redial the Press twice. 1 short beep
last number.
Switch Press
caller during twice.
a call.
Volume/Track control button
Adjust volume.
Skip forward.
Skip backward.
Mute/unmute the
microphone in a call.
Sound or LED
indicator
• 1 short beep
• 3 white flashes:
battery low <
25%
• 2 white flashes:
battery level <
50%
• 1 blue flash:
battery level >
50%
• 1 long beep
• 1 long white
flash
1 short beep
1 short beep
1 short beep
1 long beep
Slide up/ N/A
down
Press once 1 short
beep
Press twice 1 short
beep
Press 2 short
once beeps