General Options; Changing Your Preferred Language; Adjusting The Display - PURE Marshall EVOKE-1S Owner's Manual

General options

Changing your preferred language

You can select the language that your EVOKE-1S Marshall uses for menus and options.
1. Press Menu, scroll to 'Language' and push the Tune dial.
2. Turn the Tune dial to select a language (English/Francais/Deutsch) and press to confirm.

Adjusting the display

You can adjust the brightness and time-out duration of the display for when the unit is switched
on and in standby. To change display options:
1. Press Menu, scroll to 'Display settings' and push the Tune dial.
2. Now choose either 'Active' to change settings that apply when the unit is switched on, or
'Standby' to change settings that apply in standby.
Changing the display time-out duration
Select 'Duration' and choose from the following two modes:
Always on The screen is always set to your preferred brightness level.
Timed off The screen is set to your preferred brightness level when a
button is pressed and then switches off after 7 seconds of inactivity.
Changing your preferred brightness level
Select 'Brightness' and choose from the following options:
Automatic The brightness of the screen adjusts automatically depending on the ambient light
levels in the room (default).
1–10 Turn the Tune dial to vary the brightness level between 1 (very dim) and 10 (very
bright) and push to confirm your preferred setting.
Set clock
(Menu > Set clock)
You can manually set the time and date if required. If you have a digital signal and/or a good FM
(RDS) reception these will be updated automatically.
(Menu > Language)
(Menu > Display settings)
EN
11