Table of Contents
Advertisement
General setup options
Display
To change the screen backlight settings, select one of the following options:
Brightness
To change the screen brightness turn the Tune knob to choose between Off, Low and High
and push to select one.
Standby mode
XT
To change the screen brightness for when your EVOKE-2
is in standby mode turn the Tune
knob to choose between Off, Low and High and push to select one.
Sw version
Displays the version of the software in your radio. You may be asked to quote this if you
contact Technical Support.
Sw upgrade
XT
You can upgrade the software in your EVOKE-2
using a PC connected to the USB port on
the rear panel. To upgrade, select Sw upgrade and follow the instructions provided with the
software. Upgrades may be issued to provide enhanced functions or improve performance.
Register your product and include an e-mail address to receive notification of software
updates or visit our website at www.pure.com/support. To exit the software upgrade menu
press the Menu button again.
14
Hide quick links:
Advertisement
Table of Contents
