Using Batteries - PURE POCKETDAB 2000 Owner's Manual

Using batteries

Your PocketDAB 2000 is supplied with three high-power
rechargeable AA size NiMh batteries. You can also use alkaline
(non-rechargeable) or other rechargeable batteries of the same
size.
Inserting the batteries
To insert the batteries slide the battery cover down with your
thumb and lift off. Insert the batteries in the orientation shown
on the base of the battery compartment and replace the battery
cover.
Replacing the batteries
The battery gauge on the LCD display gives an indication of
battery power remaining from full power (
When battery power is low the LCD backlight will not operate to
help maximise remaining battery power.
To remove old batteries push them against the spring connectors
and lift them clear. Insert the new batteries as described above.
Recharging batteries
Note Only the supplied rechargeable batteries can be recharged
in your PocketDAB 2000, others will require a separate charger.
Connect your PocketDAB 2000 to the mains and switch the unit
on with the supplied batteries inserted. Charging will commence
and is indicated by an animated battery icon on the display. You
can use the unit as normal while battery charging is underway.
When charging is complete the battery icon will disappear.
) to empty ( )
21