Item Checklist - Abit SR7-8X User Manual

Introduction of SR7-8X Features
The Switching Power Supply must meet ATX 2.03 specification with ATX12V1 Power
connector.
Supports Wake On LAN, Wake On Ring, but your ATX power supply 5V standby power must
be able to provide at least a 720mA current capacity. Otherwise, the functions may not work
normally.
This motherboard supports the standard bus speeds of 66 MHz/100 MHz/133 MHz that are
used by specific PCI, processor and chipset specifications. Exceeding these standard bus speeds
is not guaranteed due to the specific component specifications.
Specifications and information contained in this manual are subject to change without notice.
All brand names and trademarks are the property of their respective owners.

2-3. Item Checklist

Check that your package is complete. If you discover any damaged or missing items, please contact your
retailer or dealer.
One ABIT SR7-8X Motherboard
One 80-wire/40-pin ribbon cable for master and slave Ultra DMA 133, Ultra DMA 100, Ultra DMA
66 or Ultra DMA 33 IDE devices
One ribbon cable for 3.5" floppy disk devices
One compact disc for support drivers and utilities
One Rear I/O shield bracket
One USB cable
One user's manual for the motherboard
Note
2-3
User's Manual