Load Fail-Safe Defaults; Load Optimized Defaults - Abit SD7-533 User Manual

3-32
CPU Shutdown Temperature:
Five options are available: Disabled ) 60℃/140℉ ) 65℃/149℉ ) 70℃/158℉ ) 75℃/167℉.
The default setting is Disabled. You can set the processor shutdown temperature here. If the processor
temperature exceeds the settings value, the system will shutdown immediately to prevent the processor
from overheating.
All Voltages, Fans Speed and Thermal Monitoring:
These items list the current states of the processor and environment (using RT1 to detect them.)
temperatures as well as fan speeds (processor fan and chassis fan). It cann't be changed by the user.
The following items list the voltage states of the system power. It is also unchangeable.
The hardware monitoring features for temperatures, fans and voltages will occupy the I/O address
from 294H to 297H. If you have a network adapter, sound card or other add-on cards that might use
those I/O addresses, please adjust your add-on card I/O address, to avoid the use of those addresses.

3-9. Load Fail-Safe Defaults

When you press <Enter> on this item you get a confirmation dialog box with a message similar to:
Pressing "Y" loads the BIOS default values for the most stable, minimal-performance system operations.

3-10. Load Optimized Defaults

When you press <Enter> on this item you get a confirmation dialog box with a message similar to:
Pressing "Y" loads the default values that are factory settings for optimal performance system operations.
SD7-533 Motherboard
Note
Load Fail-Safe Defaults (Y/N)? N
Load Optimized Defaults (Y/N)? N
Chapter 3