Abit KR7A User Manual page 74

5-4
Step 7: Choose "Yes, I want to restart my
computer now." in the check box and click
"Finish"restart your computer to finish the driver
update.
Installing the driver (During a fresh Windows
Note: Follow the standard procedures for installing Windows
1. During the first part of the setup procedure, Windows
specify an additional device. Press "F6" key, and let Windows continue on with setup. It will
continue to scroll through various device listings for several minutes. It will then prompt you to
press the "S" key to add a device.
2. Press "S" key, and insert the HPT 372 driver diskette. Press <Enter> when prompted and allow
®
Windows 2000 to install the HPT 372 drivers.
®
3. Windows 2000 will continue and complete the installation procedure.
KR7A/KR7A-RAID
Step 8: The "Digital Signature Not Found"
menu appears. Click "Yes" to continue.
Step 9: Go to the "Control Panel" ) "System
Properties" ) "Device Manager". Now you
can see that the driver is installed under the item
of "SCSI and RAID controllers".
®
2000 installation)
®
2000.
®
2000 will prompt you to press "F6" key to
Chapter 5