Chapter 5. Hpt 372 Driver Installation; Windows 98 Se - Abit KR7A User Manual

HPT 372 Driver Installation

Chapter 5. HPT 372 Driver Installation

Here we will show you the driver installation procedure under various operating systems.
®
5-1. DOS
This IDE RAID BIOS supports DOS
5-2. Windows
Step 1: After the Windows
system had been installed and rebooted
successfully, go to the "Control Panel" )
"System Properties" ) "Device Manager".
You can see the driver is not yet installed, and
there is a device named "? PCI Mass Storage
Controller" under "Other devices".
Step 2: Insert the KR7A/KR7A-RAID CD into
your CD-ROM drive. It should execute the
program automatically. If not, you can go to the
CD location and execute the execution file at the
main directory of the CD. After it has been
executed, you will see the screen below.
®
5.x (or above) and Windows
®
98 SE
®
98 SE operating
®
3.1x without the software driver.
Step 3: Move the cursor to "HPT 37X Driver"
and click on it. You will go to the next screen.
Step 4. The "InstallShield Wizard" shows up,
and it will go to the next screen for a while.
5-1
User's Manual