Operation; Preparations Prior To Playing; Starting Playback; Starting Recording - Denon PMA-710AE Owner's Manual

ENGLISH

Operation

Symbols used to indicate buttons in this manual
Button located on both the main unit and
the remote control unit
Button only on the main unit
Button only on the remote control unit
<LOUDNESS>
VOLUME
<SPEAKERS>
POWER <BASS> <BALANCE>
<TREBLE> <REC OUT SELECTOR>
8

Preparations Prior to Playing

1
Set the volume to the minimum by using
BUTTON
<BUTTON>
2
<SOURCE DIRECT>
[BUTTON]
Set
"OFF".
3
<SOURCE DIRECT> <BASS>
Set
center position.
4
<SPEAKERS> A
Press
to which speakers are connected.
5
Turn on the power by pressing
The power indicator blinks red for several seconds, then lights
green.
INPUT SELECTOR

Starting Playback

1
INPUT SELECTOR
Use
POWER
played.
The input indicator for the selected source lights.
[Selectable source]
RECORDER-2 RECORDER-1 PHONO
INPUT SELECTOR
LINE
2
Play the selected source.
3
VOLUME
A djust the volume by using
4
A djust the tone with
<LOUDNESS>
and
b If there is no need to adjust the tone, press
VOLUME
.
<LOUDNESS>
and
<TREBLE> <BALANCE>
, and to the
B
or depending on the terminals
POWER
.
to select the source to be
CD TUNER
VOLUME
.
<BASS> <TREBLE> <BALANCE>
, ,
.
<SOURCE DIRECT>

Starting Recording

1
<REC OUT SELECTOR>
Turn
recorded.
[Selectable source]
to
PHONO CD TUNER LINE
2
Set the recorder to the record mode.
3
Start playing the source to be recorded.

Copying Recorders

1
<REC OUT SELECTOR>
Turn
1 2" (or "RECORDER-2
1 1
[Selectable source]
RECORDER-1 2 RECORDER-2
1
b When copying from a device connected to the "RECORDER-1"
terminal to a device connected to the "RECORDER-2" terminal,
select "RECORDER-1 2".
1
b When copying from a device connected to the "RECORDER-2"
terminal to a device connected to the "RECORDER-1" terminal,
select "RECORDER-2 1".
1
2
Set the device connected to the RECORDER-1 (or
RECORDER-2) terminal to the record mode.
3
Start playback on the device connected to the
RECORDER-2 (or RECORDER-1) terminal.
• The sound to be recorded can be heard by selecting the playback
INPUT SELECTOR
source with , while the recorded sound can be
heard by selecting the recorder.
.
• When performing these operations, also refer to the operating
instructions of the other devices.
NOTE
The sound may be interrupted or noise may be recorded if
SELECTOR
is operated during recording.
to select the source to be
and select "RECORDER-
1").
1
1
INPUT