Download Print this page

Installation; Rear Panel Connections - Cambridge Audio 540A User Manual

Hide thumbs Also See for 540A:

Advertisement

INSTALLATION

Please take a moment to read these notes before installing your
amplifier, they will enable you to get the best performance and prolong
the life of the product.
This unit should be installed on a sturdy, level surface. Due to stray
magnetic fields turntables should not be located nearby due to
interference.
The unit requires ventilation above and below. Do not situate it on a rug
or other soft surface and do not obstruct the air inlet and outlet grilles
on the underside and top cover. Do not place in an enclosed area such
as a bookcase or in a cabinet.
This unit must not be exposed to dripping or splashing water or other
liquids. No objects filled with liquid, such as vases, shall be placed on
the unit. In the event, switch off immediately, disconnect from the mains
supply and contact your dealer for advice.
Do not route the power cable so that it can be walked upon or damaged
by other items near it.
Electronic audio components have a running in period of around a week
(if used several hours per day). This will allow the new components to
settle down, the sonic properties will improve over this time.
Do not plug a source component directly into a power amplifier unless it
has a variable output level.
Always turn a control amplifier on before a power amplifier.
Never turn on a power amplifier when no control amplifier is connected.
It is recommended that when bi-amping, the same type power amplifiers
are used.
If you do not intend to use this unit for a long period of time, switch it off
and unplug it from the mains socket.
To clean the unit, wipe it's case with a moist, lint-free cloth. Do not use
any cleaning fluids containing alcohol, ammonia or abrasives. Do not
spray an aerosol at or near the amplifier.
These units are not user serviceable, never attempt to repair,
disassemble or reconstruct the unit if there seems to be a problem. A
serious electric shock could result if this precautionary measure is
ignored. In the event of a problem or failure, please contact your dealer.

REAR PANEL CONNECTIONS

Note: S S ome f f eatures m m ay n n ot a a pply t t o a a ll m m odels. R R efer t t o t t he d d iagram
on y y our a a ccompanying O O wners' C C ertificate.
A & C SERIES (INTEGRATED & CONTROL AMPLIFIERS)
Ground c c onnection
If you are connecting a turntable to your amplifier then its ground wire
should be attached to this point.
Aux/Phono
Connect any 'line level' source equipment to these sockets i.e. CD player
or DAB tuner. Alternatively a turntable can be connected, but first a
phono stage must be installed. Please contact your Cambridge Audio
dealer who can supply and install a phono stage to your amplifier. These
inputs a a re f f or a a nalog a a udio s s ignals o o nly. T T hey s s hould n n ot b b e c c onnected
to t t he d d igital o o utput o o f a a C C D p p layer o o r a a ny o o ther d d igital d d evice.
AV/DVD/MD/Tape 2 2
Connect a video derived audio signal to these sockets, such as the
audio monitor / receiver or Television decoder. Alternatively, any line
level audio signal may be connected here, including a second tape deck
or MiniDisc player.
Amplifiers
5

Hide quick links:

Advertisement

loading

This manual is also suitable for:

640a