Miele KM 390 G Operating Instructions Manual page 23

^ Make sure that all the locating tabs
and notches line up exactly. Place
the burner head o on to the burner
base p so that the ignitor and the ig-
nition safety control extend through
their respective holes in the burner
head. The burner head must click
into place correctly.
^ Replace the burner ring n.
^ Replace the burner cap m ensuring
that the locating tabs fit into the
notches in the burner head.
Important: replace parts in the correct
order after cleaning.
1. Do not mix up the top and bottom.
2. The locating lugs must fit exactly
into the notches.
23