Cub Cadet GT 2554 Operator's Manual page 51

2500 series
Hide thumbs Also See for GT 2554:
Table of Contents

Advertisement

Possible Cause
Air cleaner clogged .................................................
Engine overload ......................................................
Engine overheated ..................................................
Fuel tank air vent clogged .......................................
Air leakage between carburetor and engine ...........
Incorrect timing or faulty ignition .............................
Brake dragging........................................................
Insufficient cooling air — dirt or debris clogging the:
air intake screen • shrouds • cooling fins ...............
Oil level incorrect ....................................................
TROUBLE SHOOTING
LACK OF POWER
Service the air cleaner element. Refer to "MAINTE-
NANCE."
Reduce the load.
Make sure the air intake screen, shrouding, and engine
cooling fins are free of accumulated dirt and debris. Refer to
"MAINTENANCE."
Remove obstruction from the vent in the fuel tank cap.
Remove air cleaner. Tighten the carburetor and manifold
mounting nuts. Replace any damaged parts as indicated in
"MAINTENANCE."
*
Adjust the brake. Refer to "ADJUSTMENTS."
Keep the air intake screen and cooling fins clean; refer to
"MAINTENANCE."
Engine oil level must not be over the "FULL" mark or below
the "LOW" mark on dipstick. Refer to "MAINTENANCE."
* See your authorized dealer.
51
Possible Remedy

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents