Honda GOLDWING GL1500 Owner's Manual page 100

MAITNENANCE
Rear Hub
Final Drive -~H
Gear Splines
CAUTION:
• When installing the wheel carefully, fit the brake disc be-
tween the brake pads to avoid damaging the pads.
2. After installing the wheel, apply the brake several times
and then check that the wheel rotates freely when releas-
ed. Recheck the wheel if the brake drags or if the wheel
does not rotate freely.
-
• If a torque wrench was not used for installation, see your
authorized Honda dealer as soon as possible to verify pro-
per assembly. Improper assembly may lead to loss of brak-
ing .capability.
Specified torque:
Axe nut: 110 Nom (11.0 kg-m, 80 ft-Ib)
Axle pinch bolt: 32 Nom (3.2 kg-m, 24 ft-Ib)
Shock absorber bolt, upper: 23 Nom (2.3 kg-m, 16 ft-Ib)
Shock absorber bolt, lower right: 23 N·m (2.3 kg-m, 16 ft-Ib)
lower left: 70 Nom (7.0 kg-m, 51 ft-Ib)
94