Other Block List Selections - Emerson 375 User Manual

4-16
Other Block
List Selections
Run Methods (e.g., calibrations, sensor trim,
diagnostic)
Select submenu choices as appropriate. Different
devices have different methods associated with them,
and the selections on these menus vary accordingly.
To run methods:
1. Display the Live Device List; see page 4-9.
2. Double-tap a device from the Live Device List.
3. Double-tap the desired block (typically, methods are
run in the transducer block).
4. Double-tap Methods.
5. Double-tap the type of method you want to run, e.g.,
calibration, diagnostic. Follow the navigation screens
to run the method.
Display Device Status
To display device status:
1. Display the Live Device List; see page 4-9.
2. Double-tap a device from the Live Device List.
3. Double-tap the desired block.
4. Double-tap Status. Status parameter(s) will be
displayed.
Detail Menu
To view the Detail menu:
1. Display the Live Device List; see page 4-9.
2. Double-tap the device you want to work with.
3. Scroll down the block list and double-tap Detail.
Double-tap one of the following options:
NOTE
The physical device tag and address of a device will be
read-only when, at a minimum, any of the following
hosts/linking devices are detected on the segment:
Rosemount 3420, DeltaV, Ovation, Allen-Bradley,
Honeywell Experion PKS, or Yokogawa Stardom. To
change the device tag or address, use the host system
or remove the device from the segment and connect it
directly to the 375 Field Communicator.
Fieldbus Functionality