Overview; Safety Messages - Emerson 375 User Manual

U ' M
SER S ANUAL
March 2007
S 4
ECTION

OVERVIEW

SAFETY
MESSAGES
If a segment is connected to a host system, the changes made with the 375 Field Communicator
may not be recorded in the host system's permanent database. Verify the changes in the
database. Otherwise, this could cause unpredictable results and, depending upon your
application, process disruption leading to property damage, serious injury, or death. Ensure all
safety precautions and work procedures have been followed.
Changing device parameters could adversely affect the control of your process. Put the control
loop in Manual/Out of Service before applying changes. Verify the output before returning the
control loop to Auto. Failure to do so could result in property damage, serious injury, or death.
Ensure all safety precautions and work procedures have been followed.
www.fieldcommunicator.com
F F
IELDBUS
This section provides instruction on basic fieldbus
functionality in the 375 Field Communicator. It is based
on the operation of the F
version 4.0.
Procedures and instructions in this section may require
special precautions to ensure the safety of the personnel
performing the operation. Information that raises
potential safety issues is indicated by a warning symbol
( ). Refer to the following safety messages before
performing an operation preceded by this symbol. Other
warning messages can be found in the Troubleshooting
section of this manual.
WARNING
WARNING
375 F
IELD
UNCTIONALITY
OUNDATION
C
OMMUNICATOR
Fieldbus application