Casio Privia PX-5S User Manual page 15

Display Text
Pitch Rise
Filter Rise
Amp Rise
Pitch Mod.Depth
Filter Mod.Depth
Amp Mod.Depth
Pan >Ent
Dynamic Panning
Pan Position
■ Editable Drum Tone Parameters
Display Text
Inst Edit >Ent
Inst Select
Note Off Mode
Assign Group
Pitch >Ent
Coarse
Tune
Fine Tune
Filter >Ent
Amp >Ent
B
Rise. Specifies the time it takes from the start of application of the LFO
until the effect reaches the level specified by Depth, above.
Modulation depth. Specifies how modulation is applied to the LFO.
Pan. This is a group of editable parameters associated with the panning
(sound stereo position).
Dynamic panning. To reflect changes in part panning in the sound
being produced, select "On" for this setting. Select "Off" if you do not
want changes reflected.
Panning position. Select "PreDSP" to apply panning before the DSP, or
"PostDSP" to apply panning after the DSP.
Instrument edit. This is a group of editable instruments assigned to
each keyboard.
• Press a keyboard key to specify the key to be edited.
• For details about "DSP Edit", see "Applying Effects to Notes" (page
E-18).
Instrument number select. Specifies the number of the drum tone
assigned to each key.
Note off mode. Turning on this setting causes note off to be performed
when a key is released.
Assign group. Specifies as a value from 1 to 15 which group the
currently selected key should be placed into. Only one keyboard in a
group is sounded at the same time (non-polyphonic).
Pitch envelope. For details, see the melody tone "Pitch Envelope" on
page E-11.
• For details about the setting items below, see the melody tone "Pitch
Envelope" on page E-11.
Initial Level, Attack Time
Coarse tune. Changes the pitch of notes by semitone units.
Fine tune. Fine tunes the pitch of the sound. Lowers the value up to
–256 or raises the value up to +255 in semitone steps.
Filter. For details, see the melody tone "Filter" on page E-11.
• For details about the setting items below, see the melody tone
"Filter" on page E-11.
Cutoff, Resonance, Envelope Depth, Attack Level, Decay Time,
Decay Level
• For details about the setting items below, see the melody tone "Pitch
Envelope" on page E-11.
Initial Level, Attack Time
Amp. For details, see the melody tone "Amp" on page E-12.
• For details about the setting items below, see the melody tone
"Amp" on page E-12.
Volume
• For details about the setting items below, see the melody tone "Pitch
Envelope" on page E-11.
Initial Level, Attack Time
• For details about the setting items below, see the melody tone
"Filter" on page E-11.
Attack Level, Decay Time, Decay Level
Description
Description
Using Built-in Tones (Tutorial)
Settings
–64 - 0 - +63
–64 - 0 - +63
Off, On
PreDSP, PostDSP
Settings
C- - G9
See "Instrument List" at
the back of this manual.
Off, On
Off, 1 - 15
–24 - 0 - +24
–256 - 0 - +255
E-13