Casio Privia PX-5S User Manual page 14

Using Built-in Tones (Tutorial)
Display Text
Resonance
Velocity Sense
Envelope Depth
Attack Level
Decay Time
Decay Level
Amp >Ent
Volume
Velocity Sense
Effect >Ent
DSP Edit >Ent
Chorus Send
Delay Send
Reverb Send
LFO >Ent
Pitch Wave
FilterAmpWave
Pitch Rate
FilterAmpRate
Pitch Depth
Filter Depth
Amp Depth
Pitch Delay
Filter Delay
Amp Delay
E-12
Resonance. Specifies the degree of cutoff of the tone in the vicinity of
the cutoff frequency.
Velocity sense. Specifies the degree of change in the filter in accordance
with change in keyboard playing touch.
Envelope depth. Specifies how the envelope is applied.
Attack level. Target level reached immediately after note on.
Decay time. Time it takes for the sound to reach the decay level from
the attack level.
Decay level. Level the sound is sustained as long as a key or pedal is
depressed.
Amp. This is a group of editable parameters associated with the amp
(volume).
• The vertical (Level) axis in the pitch envelope diagram corresponds
to the volume in the case of this group.
• For details about the setting items below, see "Pitch Envelope".
Initial Level, Attack Time, Release Time
• For details about the setting items below, see "Filter", above.
Attack Level, Decay Time, Decay Level
Volume. Specifies the amp volume.
Velocity sense. Specifies the degree of change in volume in accordance
with change in keyboard playing touch.
Effect. This is a group of editable effect function parameters. For
details, see "Applying Effects to Notes" (page E-18).
DSP edit. This is a group of editable effect function DSPs (page E-18).
em
Press the (ENTER) button to advance to the DSP editing screen
(page E-18).
Chorus send. Specifies how chorus (page E-18) is applied to a tone.
Delay send. Specifies how delay (page E-18) is applied to a tone.
Reverb send. Specifies how reverb (page E-18) is applied to a tone.
LFO. This is a group of editable LFO parameters applied to pitch, filter,
and amp.
Wave type. Specifies one of the following wave types to be used for
LFO.
FilterAmpWave is shared by filter and amp.
Sin
(sine wave)
Tri
(triangle wave)
Saw up
(sawtooth up
wave)
Saw down
(sawtooth down
wave)
Rate. LFO speed (frequency). FilterAmpRate is shared by filter and
amp.
Depth. Specifies how LFO is applied.
Delay. Specifies the degree of delay in the timing for applying LFO.
Description
Puls 1:3
(square wave 1:3)
Puls 2:2
(square wave 2:2)
Puls 3:1
(square wave 3:1)
Settings
–64 - 0 - +63
–64 - 0 - +63
0 - 127
–64 - 0 - +63
–64 - 0 - +63
–64 - 0 - +63
0 - 127
–64 - 0 - +63
0 - 127
0 - 127
0 - 127
Refer to the cell to the left.
–64 - 0 - +63
–64 - 0 - +63
–64 - 0 - +63