Omron NSA12-TX11B User Manual page 12

WARNING
While using the NSA-series Industrial PC observe all precautions given in this
manual under WARNING, Precautions for Safe Use, and Precautions for Correct
Use.
A responsible person must confirm that all installation, inspection, and
maintenance work for the NSA-series Industrial PC is performed correctly.
Here, "responsible person" is a person who has the qualifications, authority, and
responsibility to ensure safety during system design, installation, operation,
maintenance, and disposal.
A responsible person with sufficient understanding of the installed system must
perform confirmations during and after installation of the NSA-series Industrial PC.
Do not attempt to take the NSA-series Industrial PC apart or touch the terminal
blocks or the inside of the NSA-series Industrial PC while the power is being
supplied. Doing so may result in electric shock.
Do not touch the power supply input terminals with wet hands. Doing so may result
in electric shock or injury.
Do not disassemble, repair, or modify the NSA-series Industrial PC. Required
safety functions may be lost.
Do not subject the NSA-series Industrial PC to water. Do not use the NSA-series
Industrial PC where it may be subjected to water or near water. If electric
components become wet, fire may occur due to electric shock, earth leakage, or
short circuits.
If the NSA-series Industrial PC produces smoke, abnormal odors, or abnormal
sounds, turn OFF the power supply immediately and disconnect the power supply
input connector. If you continue to use the NSA-series Industrial PC, short-circuits
may result in fire or electric shock.
Do not damage the power cable. Do not damage the cable or bend the cable past
its natural bending radius. Damage to the cable may cause electric shock or fire.
Do not use the input functions of the NSA-series Industrial PC, such as the touch
switches, for applications that involve human life or serious property damage, or for
emergency stop switches.
Do not simultaneously press two or more points on the touch panel at the same
time. If two or more points are touched at the same time, a switch located at the
center point between the points may operate.
xii