Chapter 2 Network Installation; Tiway I Network And Gateway Installation Checklist; Quick Reference Installation Steps; Basic Installation And Set-Up Steps - Siemens SIMATIC TI500 User Manual

2.1

TIWAY I Network and Gateway Installation Checklist

Quick Reference
Installation Steps
2-2 Network Installation
Figure 2-1 is a quick reference list of steps to be taken when installing the
TIWAY I Gateway. Refer to Chapter 3 for specific procedures and cautions.
Connect the network and host interface cables.
Check Gateway indicators for proper operation.
Configure the variable memory of PLCs on the TIWAY I network.
Figure 2-1 Basic Installation and Set-up Steps
Attach AC power cable to the Gateway.
Run diagnostic tests.
Configure the host system.
Configure the Gateway dipswitches.
TIWAY I Gateway User Manual