Remote Control; Using The Remote Control - Siemens IC60 User Manual

5

Remote control

5.1

Using the remote control

Building Technologies
Fire Safety & Security Products
To use the system in a very easy way, you can operate all main functions from the
remote control. The remote control is a radio device. The system can manage up
to 16 remote controls, if all the 5 channels of each remote control are programmed.
The working distance between a remote control and a control unit may vary be-
tween 20-200m, depending on the environment.
Solid walls or steel/concrete may reduce the distance.
The remote control IRC60 is waterproof and can also be used in bathrooms.
With each use (transmission) a control signal is sent regarding the remaining bat-
tery power. When the battery is too low this will be indicated on the control unit dis-
play.
Losing a remote control:
WARNING If you loose a remote control or when it is stolen, the respective user must
immediately be removed from the system. Ask the installer for assistance.
Fig. 1 Remote control IRC60
Key functions
No: Symbol Key -
Indicator
1
2
3
<DISARM>
4
5
6
Key and indicator description
Tab. 5
Description
<ARM> Arming (on)
<STAY> Only the Internal system is activated
Deactivating the system (off)
Additional function
<*> This button may directly control an output,
e.g. light, garage door etc.
PANIC/ SOS Simultaneously pressing
<SOS> buttons 2 and 3 for 2sec activates the
PANIC function.
<LED> Lights up when transmitting
Remote control
19
08.2007