Lighting The Side Burner - Weber Platinum II 2200 NG Operating Manual

LIGHTING THE SIDE BURNER

For the Platinum Series II 3200 & 3400
The side burner has a separate ignition system from the
main cooking box.
DANGER
Failure to open lid while igniting the side
burner, or not waiting 5 minutes to allow gas
to clear if the side burner does not light,
may result in an explosive flame-up which
can cause serious bodily injury or death.
Lighting only the side burner. Figure 3.
1) Open the side burner lid.
2) Check that the side burner valve is OFF (push in and turn
clockwise), and all main burner control knobs are OFF
(push down and turn clockwise).
3) Turn the gas supply on.
4) Push in and turn the side burner control knob to HI.
5) Push the side burner igniter button several times so it
clicks each time.
1
5
2
4
Figure 3
CAUTION: Side burner flame may be difficult to see
on a bright sunny day.
WARNING: If the side burner does not light:
a) Turn off the side burner control valve.
b) Wait 5 minutes to let the gas clear before you try
again or try to light with a match.
WARNING: The container and contents used on
the side burner should not exceed a maximum of
50 pounds. The diameter should not exceed
14 inches in diameter.
8