Automatic And Timed Drying - GE Spacemaker WSM2420S Use And Care Manual

Ge use and care guide laundry wsm2480s, wsm2420s
Hide thumbs Also See for Spacemaker WSM2420S:
Table of Contents

Advertisement

Polyester Knits & Permanent Press Drying Tips
DO NOT OVERLOAD—
Garments being dried or
The Difference Between Automatic and Timed Drying
Automatic Drying
When using the Automatic cycles, the
Automatic DU Control system continually senses
the temperature of the air in the dryer drum. Wet
laundry keeps the air cool. When laundry is dry
enough (and the drum air warm enough) the heat
turns off. When the air cools, the heat turns back on.
This off and on cycling may happen a number of
times (depending on the fabric, load size and Cycle
Selector setting). The Cycle Selector advances (when
the heat is o~ until it automatically turns off dryer.
Auto Regular. Use this cycle to dry heavy and
medium weight cotton items. The load tumbles
without heat during the last 5 minutes. This helps
make the load easier to handle.
Auto Permanent Press. Use this cycle to dry
permanent press, knits and other synthetic items. The
load tumbles without heat during the last 10 minutes.
This helps keep wrinkles from setting in and makes
the load easier to handle.
Drying Selections Guide for the Automatic Cycles
Set to NORMAL Position
Energy prefened automatic setting.
PROMPTLY—To help prevent
wrinkling, remove clothes from
the dryer promptly at the end of
the drying cycles.
Timed Drying. When using the Timed Cycles, you
select the number of minutes you wish the dryer to
run and it turns off at the end of this time period. The
last 5 minutes of this cycle are without heat. This
helps make the load easier to handle.
Air Fluff cycle. The dryer does not heat when the
Cycle Control knob is set in AIR FLUFF. This cycle
can be used to fluff or air dry bedding, plastic
tablecloths, foam rubber pillows, stuffed toys,
sneakers, etc.
A
Set toward More Dry
For loads that include heavy-
weight fabrics.
If you desire to remove
more moisture.
PLACE ON HANGERS—
Permanent press and polyester
knit garments look best if placed
on hangers after drying.
Do not dry plastic or rubber items with heat.
Use AIR FLUFF setting, or line dry. Failure
to do so could result in fire or damaged items.
Set toward Less Dry
. For light weight fabric loads.
If you desire to remove
less moisture.
For very small loads.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spacemaker wsm2480s

Table of Contents