Nokia N97 mini User Manual page 115

1 Select Menu Settings
>
2 To increase the background scan time interval, adjust the
time in Scan for networks. To stop background scans,
select Show Wi-Fi availability
3 To save your changes, select Back.
When Show Wi-Fi availability
availability icon is not displayed in the home screen.
However, you can still manually scan for available Wi-Fi
networks, and connect to Wi-Fi networks as usual.
Q: What do I do if the memory is full?
A: Delete items from the memory. If
to perform operation. Delete some data first.
low. Delete some data from phone memory.
when you are deleting several items at the same time, delete
items one by one, beginning with the smallest items.
Q: Why can't I select a contact for my message?
A: The contact card does not have a phone number, address,
or e-mail address. Select
contact, and edit the contact card.
Q: How can I end the data connection when the device
starts a data connection again and again?
A: The device may be trying to retrieve a multimedia message
from the multimedia message center. To stop the device from
making a data connection, select
© 2011 Nokia. All rights reserved.
and Connectivity > Wi-Fi.
> Never.
is set to Never, the Wi-Fi
Not enough memory
or
is displayed
Menu Contacts and the relevant
>
Menu Messaging
>
Options Settings
>
retrieval. Select
center save messages to be retrieved later, or
all incoming multimedia messages. If you select Manual, you
receive a notification when you have a new message in the
multimedia message center. If you select Off, the device does
not make any network connections related to multimedia
messaging.
To set the device to use a packet data connection only if you
start an application or action that needs it, select
Settings and
data Packet data connection
>
If this does not help, switch the device off and then on again.
Memory
Q: Can I use my Nokia device as a fax modem with a
compatible PC?
A: You cannot use your device as a fax modem. However, with
call diverting (network service), you can divert incoming fax
calls to a fax number.
Q: How do I calibrate the screen?
A: The screen is calibrated at the factory. If it is necessary to
recalibrate the screen, select
Touch input
instructions.
and
Multimedia message
>
Manual to have the multimedia messaging
Connectivity Admin. settings
>
When
>
Menu Settings
>
Touch screen calibration. Follow the
>
Multimedia
>
Off to ignore
Menu
>
Packet
>
needed.
and Phone
>
115