Packet Data Settings; Wireless Lan Settings - Nokia N95 User Manual

WLAN network name
●
Search for networks. If you select an existing
network, WLAN network mode
security mode are determined by the settings of its
access point device.
Network status — Define whether the network
●
name is displayed.
WLAN network mode
●
an ad hoc network and to allow devices to send and
receive data directly; a WLAN access point device is
not needed. In an ad hoc network, all devices must
use the same WLAN network
WLAN security mode
●
used: WEP, 802.1x (not for ad hoc networks), or
WPA/WPA2. If you select
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network supports
them.
To enter the settings for the selected security mode,
select WLAN security settings.
For more information, see the extended user guide on
the product support pages of the Nokia website.

Packet data settings

Press , and select Tools
Connection Packet data.
>
The packet data settings affect all access points using
a packet data connection.
— Select Enter manually
and WLAN
— Select Ad-hoc to create
name.
— Select the encryption
Open network, no
Settings
> >
or Packet data connection
●
available and you are in a network that supports
packet data, the device registers to the packet data
network. Starting an active packet data connection
(for example, to send and receive e-mail) is quicker.
If there is no packet data coverage, the device
periodically tries to establish a packet data
connection. If you select
uses a packet data connection only if you start an
application or action that needs it.
Access point — The access point name is needed
●
to use your device as a packet data modem to a
compatible computer.
High speed packet access
●
use of HSDPA (network service) in UMTS networks.

Wireless LAN settings

Press , and select
Connection Wireless
>
Show WLAN availability
●
displayed in the standby mode when a wireless LAN
is available.
Scan for networks
●
availability to Yes, select how often the device
searches for available wireless LANs and updates the
indicator.
To view advanced settings, select
Advanced settings. Changing wireless LAN advanced
settings is not recommended.
— If you select When
When needed, the device
— Enable or disable the
Tools Settings
> >
LAN.
— Select whether
— If you set Show WLAN
Options
>
is
101