Adjusting Your Hard Disk Setting (Only For Vkm400Am-S) - AOpen vKM400Am-S Manual

Adjusting your Hard Disk Setting (only for vKM400Am-S)

Except its original 2 sets of parallel IDE, this motherboard supports the latest
serial ATA hard disk. If you are unable to find your newly installed serial ATA hard
disks on your operating system after having them installed, the problem may lie
in the BIOS setting. You can simply adjust BIOS settings to have them work
properly.
After installing your hard disks properly, you can directly go to BIOS setting
screen for adjustment. Simply pressing "Integrated Peripherals
VIA-OnChip IDE Device OnChip SATA" to either enable or disable SATA
interface
18