Component System Configuration - Panasonic AK-HC3800G Operating Instructions Manual

Component system configuration

An example of the standard system consisting of the Studio Handy Camera (AK-HC3800G/GS) and peripheral components is shown below.
The basic system configuration includes the lens, Studio Handy Camera, viewfinder, CCU, and ROP.
System block diagram
Microphone Kit
AJ-MC700
Color Viewfinder
AJ-CVF100G
2˝ HD Viewfinder
AJ-HVF21KG
Handy lens
Memory card
Outline of peripheral components
z Camera Control Unit (CCU: AK-HCU200/S)
This is the camera control unit for the Studio Handy Camera.
It is connected to the Studio Handy Camera using an optical fiber
multi cable.
<Note>
Do not connect a camera control unit other than AK-HCU200/S.
z Remote Operation Panel (ROP: AK-HRP200G)
The ROP is connected to the CCU using the ROP cable, and enables
the camera, CCU, and lens to be remotely controlled.
z Color Viewfinder (1˝ VF: AJ-CVF100G)
z 50.8 mm (2-inch) HD Viewfinder (2˝ VF: AJ-HVF21KG)
This is the viewfinder for the Studio Handy Camera.
z 17.8 cm (7-inch) LCD Viewfinder (7˝ LCD VF: AK-HVF70G)
This is the LCD viewfinder for the Studio Handy Camera.
16
Microphone Holder
AJ-MH800G
Studio Handy Camera
AK-HC3800G/GS
Tripod Attachment
SHAN-TM700
Camera Control Unit (CCU)
AK-HCU200/S
7˝ LCD Viewfinder
AK-HVF70G
Optical fiber multi cable
Remote Operation Panel (ROP)
AK-HRP200G
Component connections
Refer to pages 14 to page 15 for the component connections.
After all the components have been connected, set the CCU's main
power switch to the ON position.
Then turn on the camera's power switch.
ROP cable