Attaching The Battery Pack - Nikon MB-D80 Instruction Manual

The MB-D80 is equipped with an alternate
En
button for use when taking photo-
graphs in "tall" (portrait) orientation. This but-
ton performs the same functions as the
button on the camera and is aff ected by
changes to Custom Setting 18 (AE-L/AF-L).
See the camera Guide to Digital Photography
for details.
4
Before attaching the battery pack, be sure that the camera is off and that the MB-D80 control lock
(Figure A- ) is in the position.
Remove the contact cap (Figure A- ) from the battery pack. Be sure to replace the cap when
the MB-D80 is not in use. The cap can be threaded onto the camera strap when removed from
the battery pack.
Open the camera battery-chamber cover and remove it from the base of the camera handgrip
as shown in Figure B. Remove the battery, if present, and place the camera battery-chamber
cover in the battery-chamber cover holder (Figure C).
A PB-6D and PK-13 auto-extension ring are required when using PB-6 bellows with the
MB-D80.
Insert the MB-D80 as shown in Figure D.
Firmly tighten the attachment wheel by rotating it in the direction shown by the
(Figure E).
To remove the MB-D80, turn the camera off and set the control lock on the MB-D80 to and then
follow the above steps in the reverse order.
Be sure to place the camera battery-chamber cover in the battery-chamber cover holder to prevent
loss.
arrow