Replacing The Tail/Brake Light Bulb Or A Rear Turn Signal Light Bulb - Yamaha MAJESTY YP125E Owner's Manual

Replacing the tail/brake light
bulb or a rear turn signal
light bulb
Tail/brake light bulb
1. Screw
2. Tail/brake light lens
3. Bulb
1. Remove the tail/brake light lens
by removing the screw.
2. Remove the defective bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAUS1130 Rear turn signal light bulb
4
3
3
2
1
1. Turn signal light lens
2. Screw
3. Turn signal light bulb lens
4. Bulb
1. Remove the tail/brake light bulb
lens by removing the screw.
2. Remove the left or right turn sig-
nal light bulb lens by pulling it
backwards.
3. Remove the bulb cap by remo-
ving the screw.
4. Remove the defective bulb by
pushing it in and turning it coun-
terclockwise.
5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
6. Install the bulb cap by installing
the screw
7. Install the turn signal light bulb
8. Install the tail/brake light bulb
2
CAUTION:
Do not overtighten the screws,
1
otherwise the lens may break.
6-30
lens.
lens by installing the screw.
ECA10680
6