License Plate Light; Replacing The Auxiliary Light Bulb; (If Equipped) - Yamaha AEROX NS50 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
6

License plate light

If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
[ECA11191]
EAU24330
Replacing the auxiliary light
bulb (if equipped)
If the auxiliary light bulb burns out, re-
place it as follows.
1. Place the vehicle on the center-
2. Remove cowling A. (See page
3. Remove the auxiliary light bulb
ZAUM0940
1. Auxiliary light bulb socket
4. Remove the burnt-out bulb by pull-
6-24
stand.
6-6.)
socket (together with the bulb) by
pulling it out.
ing it out.
EAU45463
1