Checking And Lubricating The Throttle Grip And Cable; Lubricating The Front And Rear Brake Levers; Checking And Lubricating The Centerstand - Yamaha AEROX NS50 Owner's Manual

Hide thumbs Also See for AEROX NS50:
Table of Contents

Advertisement

Checking and lubricating the
throttle grip and cable
The operation of the throttle grip should
be checked before each ride. In addi-
tion, the cable should be lubricated by a
Yamaha dealer at the intervals speci-
fied in the periodic maintenance chart.
The throttle cable is equipped with a
rubber cover. Make sure that the cover
is securely installed. Even though the
cover is installed correctly, it does not
completely protect the cable from water
entry. Therefore, use care not to pour
water directly onto the cover or cable
when washing the vehicle. If the cable
or cover becomes dirty, wipe clean with
a moist cloth.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23114
Lubricating the front and rear
brake levers
ZAUM0061
The pivoting points of the front and rear
brake levers must be lubricated at the
intervals specified in the periodic main-
tenance and lubrication chart.
Recommended lubricant:
Silicone grease
EAU23172
Checking and lubricating the
centerstand
ZAUM0455
1. Centerstand
The operation of the centerstand
should be checked before each ride,
and the pivots and metal-to-metal con-
tact surfaces should be lubricated if
necessary.
If the centerstand does not move up
and down smoothly, have a Yamaha
dealer check or repair it. Otherwise,
the centerstand could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
6-17
WARNING
EAU23192
1
6
EWA11301

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aerox ns50nAerox r ns50Aerox r ns50n

Table of Contents