Fuel And Battery Voltage Gauge - Yamaha MAJESTY YP125E Owner's Manual

4. Press the reset button to switch
the mode.
5. Press the reset button for two
seconds to confirm the setting.
TIP
●
The odometer/tripmeter reading
mode can be changed any num-
ber of times while the odometer
reading is below 10 (kilometers or
miles), but it cannot be changed
anymore after the reading has
reached 10 (kilometers or miles).
●
Switching between the kilometer
mode and the mile mode does
not change or convert the current
odometer/tripmeter reading.
INSTRUMENT AND CONTROL FUNCTIONS
Fuel and battery voltage
gauge
1. Fuel gauge
2. Battery voltage
When the key is turned to "
battery voltage is indicated
for two seconds, and then the amount
of fuel in the fuel tank is indicated.
NOTICE: If the needle drops to the
"10V" (low) mark, have a Yamaha
dealer check the battery.
3-4
EAUS1460 TIP
●
The needle moves towards "E"
(empty) as the fuel level decrea-
ses.
●
When the needle reaches "E",
1
refuel as soon as possible.
2
", the
[ECAS0030]
3