Indicator And Warning Lights; Turn Signal Indicator Lights; High Beam Indicator Light; Oil Change Indicator - Yamaha MAJESTY YP125E Owner's Manual

To unlock the steering
1
2
1. Push.
2. Turn.
1. Push the key in, and then turn it
to " " while still pushing it.
INSTRUMENT AND CONTROL FUNCTIONS

Indicator and warning lights

TOTAL TRIP
1 2 3 4 5
1. Alarm indicator light
2. Left turn signal indicator light "

3. High beam indicator light "

4. Coolant temperature warning
light " "
5. Right turn signal indicator light "

Turn signal indicator lights "

and " "
The corresponding indicator light flas-
hes when the turn signal switch is
pushed to the left or right.
High beam indicator light "
This indicator light comes on
when the high beam of the headlight
is switched on.
3-2
EAU11003

Oil change indicator

At the initial 1000 km (600mi) and
every 3000 km (1800 mi) thereafter,
"CHnGE OIL" appears in the odome-
ter/clock display to indicate that the
engine oil should be changed. (See
page 6-9).

Coolant temperature warning light

" "
This warning light comes on if the
"
engine overheats. If this occurs, stop
"
the engine immediately and allow the
engine to cool.
The electrical circuit of the warning
"
light can be checked according to the
EAU11030
following procedure.
"
1. Turn the key to "
2. If the warning light does not
come on, have a Yamaha dealer
check the electrical circuit.
NOTICE
EAU11080
Do not continue to operate the
"
engine if it is overheating.
EAUS1450
3
EAUM1082
".
ECA10021