PERIODIC MAINTENANCE AND MINOR REPAIR
1
1
2
3
1. Right floorboard mat
4
3. Remove the coolant reservoir cov-
er by removing the screw.
5
1
6
7
8
9
1. Screw
2. Coolant reservoir cover
4. Check the coolant level in the cool-
ant reservoir.
NOTE:
The coolant should be between the
minimum and maximum level marks.
5. If the coolant is at or below the
minimum level mark, open the
coolant reservoir cap, add coolant
to the maximum level mark, and
then close the coolant reservoir
cap.
2
1. Minimum level mark
2. Maximum level mark
3. Coolant reservoir cap
CAUTION:
6-18
2
1
Coolant reservoir capacity (up to the
maximum level mark):
0.32 L (0.34 US qt) (0.28 Imp.qt)
G
If coolant is not available, use
distilled water or soft tap water
instead. Do not use hard water
or salt water since it is harmful
to the engine.
G
If water has been used instead
of coolant, replace it with cool-
ant as soon as possible, other-
wise the cooling system will not
be protected against frost and
3
ECA10471