Yamaha MAJESTY 400 Owner's Manual page 22

Hide thumbs Also See for MAJESTY 400:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS
1
2
1
2
3
1. V-belt replacement indicator "V-BELT"
2. Fuel level warning indicator "
4
3. Coolant temperature warning indicator
"
"
5
4. Oil change indicator "OIL"
The multi-function display is equipped
6
with the following:
G
a fuel meter
7
G
a coolant temperature meter
G
an odometer (which shows the to-
tal distance traveled)
8
G
two tripmeters (which show the
distance traveled since they were
9
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled since
the bottom segment of the fuel
meter and fuel level warning indi-
cator started flashing)
3
4
G
a self-diagnosis device
G
a clock
G
an ambient temperature display
G
an oil change indicator
G
a V-belt replacement indicator
NOTE:
G
Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
SET" buttons.
G
When the key is turned to "ON", all
"
of the display segments of the
multi-function display will appear
one after the other and then disap-
pear, in order to test the electrical
circuit.
Odometer and tripmeter modes
Pushing the "SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP" in the following order:
ODO → TRIP (top) → TRIP (bottom) →
ODO
When approximately 2.8 L (0.74 US
gal) (0.62 Imp.gal) of fuel remains in the
fuel tank, the bottom segment of the
fuel meter and fuel level warning indica-
tor will start flashing, and the display will
automatically change to the fuel re-
serve tripmeter mode "TRIP F" and
start counting the distance traveled
from that point. In that case, pushing
the "SELECT" button switches the dis-
play between the various tripmeter and
odometer modes in the following order:
TRIP F → TRIP (top) → TRIP (bottom)
→ ODO → TRIP F
1. Fuel reserve tripmeter
To reset a tripmeter, select it by push-
ing the "SELECT" button until "TRIP" or
"TRIP F" begins flashing ("TRIP" or
"TRIP F" will only flash for five sec-
onds). While "TRIP" or "TRIP F" is
flashing, push the "RESET" button for
at least one second. If you do not reset
3-6
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Majesty yp400Majesty yp400a

Table of Contents