Coolant - Yamaha Versity VP300 Owner's Manual

Hide thumbs Also See for Versity VP300:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR

Coolant

The coolant reservoir is located under
the panel B. (See page 6-9 for panel
removal and installation procedures.)
To check the coolant level
1. Place the scooter on a level sur-
face and hold it in an upright posi-
tion.
NOTE :
The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
6
Make sure that the scooter is
positioned straight up when
checking the coolant level. A slight
tilt to the side can result in a false
reading.
EAU04591*
ZAUM0444
1. Maximum level mark
2. Minimum level mark
2. Check the coolant level in the
coolant reservoir.
NOTE :
The coolant should be between the
minimum and maximum level marks.
1
2
ZAUM0445
1. Coolant reservoir cap
6-17
1
3. If the coolant is at or below the
minimum level mark, remove the
reservoir cap, add coolant to the
maximum level mark, and then
install the reservoir cap.
Coolant reservoir capacity:
0.4 L
4. Install the panel.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versity 300

Table of Contents