Yamaha Versity VP300 Owner's Manual page 22

INSTRUMENT AND CONTROL FUNCTIONS
1
3
ZAUM0392
1. Distance
2. Time
3. Average speed
NOTE :
•
The Trip/fuel odometer is only
activated if the fuel level warning
light comes on.
•
The Trip 2
automatically reset after turning
the key to " " (2 Hours).
Pushing the "SET" button when in the
tripmeter mode switches the display
between the different tripmeter
functions in the following order:
Distance Time
speed Distance
"Set"
2
"Set"
"Set"
3
ZAUM0393
If the fuel level warning light comes on
(See page 3-3.), the display will
automatically change to the fuel reserve
tripmeter mode "Trip/fuel" and start
odometer is counting the distance traveled from that
point. In that case, pushing the "MODE"
button switches the display between the
various tripmeter and odometer modes
in the following order:
Trip/Fuel
Total
Average
Trip 1 Trip 2
Trip/fuel
3-5
To reset a tripmeter, select it by pushing
the "MODE" button, and then push the
"SET" button for at least one second. If
you do not reset the fuel reserve
tripmeter manually, it will reset itself
automatically and the display will return
to the prior mode after refueling and
traveling 5 km (3 mi).