Engine Oil - Yamaha Versity VP300 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Tightening torque:
Spark plug:
17.5 Nm (1.75 m
NOTE :
If a torque wrench is not available when
installing a spark plug, a good estimate
of the correct torque is 1/4 – 1/2 turn
past finger tight. However, the spark
plug should be tightened to the
specified torque as soon as possible.
4. Install the spark plug cap.
6
5. Install the cowling.

Engine oil

The engine oil level should be checked
before each ride. In addition, the oil
kg)
•
must be changed at the intervals
specified in the periodic maintenance
and lubrication chart and when the oil
change indicator comes on.
EAUM0103*
To check the engine oil level
NOTE :
Make sure that the scooter is positioned
straight up when checking the oil level.
A slight tilt to the side can result in a
false reading.
6-13
1. Place the scooter on the
centerstand.
2. Start the engine, warm it up for
several minutes, and then turn it
off.