Radio Text - Volvo S40 Owner's Manual

Infotainment system
Radio functions
Display of programme type
The programme type of the current station
can be shown on the display.
NOTE! Not all radio stations support this
function.
Activating/deactivating display
– Press MENU and then ENTER.
– Scroll to PTY and press ENTER.
– Scroll to Show PTY and press ENTER.

Radio text

Some RDS stations transmit information on
programme content, artists, etc. This infor-
mation can be shown in the display.
Activating/deactivating radio text
– Press MENU and then ENTER.
– Scroll to Radio text and press ENTER.
Automatic frequency update –
AF
The AF function selects one of the strongest
transmitters for a set station. The radio may
sometimes need to search through the entire
FM wavelength to find a strong transmitter. If
this occurs, the radio mutes and PI seek Exit
to cancel appears on the display.
Activating/deactivating AF
– Press MENU and then ENTER.
192
– Scroll to Advanced radio settings and
press ENTER.
– Scroll to AF and press ENTER.
Regional radio programmes –
REG
This function causes the radio to
continue with a regional transmitter
even if its signal strength is low.
REG indicates that the function is
active. The regional function is normally
deactivated.
Activating/deactivating REG
– Press MENU and then ENTER.
– Scroll to Advanced radio settings and
press ENTER.
– Scroll to Regional and press ENTER.
Enhanced Other Networks –
EON
The EON function is particularly useful in
urban areas with many regional radio
stations. It allows the distance between the
car and the radio station transmitter
determine when programme functions should
interrupt the current audio source.
• Local – interrupts only if the radio station
transmitter is close.
1
• Distant – interrupts if the station trans-
mitter is far away, even if there is a lot of
static.
• Off – no interruption for programmes
from other transmitters.
Activating/deactivating EON
– Press MENU and then ENTER.
– Scroll to Advanced radio settings and
press ENTER.
– Scroll to EON and press ENTER.
– Scroll to Local, Distant or Off and press
ENTER.
Resetting RDS functions
Resets all radio settings to the original factory
settings.
– Press MENU and then ENTER.
– Scroll to Advanced radio settings and
press ENTER.
– Scroll to Reset all and press ENTER.
Volume control, programme
types
The interrupting programme form is heard at
the volume selected for such. If the volume
level is adjusted during the programme inter-
ruption, the new level is saved until the next
programme interruption.
1. Default/Factory setting.